F&Q

Do I need a flash coat to my RV epdm roof before applying Tough Roof RV?

Yes you will want to make sure that tough roof is adhering to your epdm surface the best way to test this is to apply a thin layer in a 1 ft by 1 ft area wait 3 hours for it to dry. then apply a thicker coat the the 1 ft area if it doesnt peel up your good to go.

My EPDM roof is deterioration what should I do apply the coat over it or not?

when we get a deteriorating sub layer of rubber its typically do to weather and conditions that the roof has endured over the past years. Tough Roof RV actually creates a membrane over this rubber giving it strength and providing a moisture barrier to insure your deteriorating roof last longer. Our suggestion is to determine if you would be best to remove the epdm if it has tears or holes. apply tough tape over holes or crack to the epdm followed by tough repair over the tape this will provide a strong bond and prevent more damage for occurring.

What is the shelf life of tough roof?

Tough Roof has one of the longest shelf life of all liquid rubber over 15 years if kept in a cool place with a tight seal to the can.

If I see bubbles occur after applying is that normal?

after applying tough roof rv you may incur bubbles on your roof. this sometimes happens due to weather changes or moisture control. It important to apply tough roof to a clean dry surface this will minimize your risk of this happening. However if it does occur it typically takes about 2 days for the bubbles to disappear.

How soon can I drive after applying Tough Roof RV

You can drive after about 4 - 8 hours we recommend you test a few areas to make sure that the rubber has bonded and is becoming harden.

What should I do about caulking areas am i ok to go over them?

Tough Roof can go over caulking areas as long as they are in good shape and not cracking or brittle. We recommend using tough tape to go over caulking areas then bond over it with tough repair. This will give your roof a full seamless mebrane.

RV Roof Primer

I took the bladder off of my camper because it had torn. I used the Primer directly on the plywood roof. It is a clear primer, more like a liquid cleaner. It worked well and prepared the bare plywood for the Tough Tech RV roof paint.

Need to return a kit that I didn’t order.

Customer service is bad. Can’t get anyone to talk to. I tried lots of calls, e-mails. No answer.product is good just the customer service is terrible!!

Awesome, beautiful

Our roof looks bright and new. There is a considerable diffrence in temps from the old to the new coating much cooler. We are in SE Texas where it's HOT hoping this helps. Very easy application only thing is I wish there was better step instructions, when you spend this much I want to make sure we are doing it right. I need to show before and after. Worth the money

Easy to use, hardest part is the prep needed before using this liquid rubber

Make sure you follow the prep instructions as that will make or break your project, I found that the preparation step is harder and takes longer than the actual application of this liquid rubber. The liquid rubber rolled on fairly easily, it wasn't overly tacky or thick. After the application my basement wall has yet to have moisture seep through it. This is doing the trick to keep the interior basement wall dry. Now no more leaning up on the wall and getting wet and dirty!

Good quality

Easy to apply sealant, has a strong smell but it works great. This Everbond Liquid Rubber Waterproof Sealant is very effective and durable. Perfect for those roof leaks . This sealant is worth the price . Highly recommended.

Item added to your cart

F&Q